[GUFSC] XFree86 não parte. ** Ja testou o driver "nv" **
Job
job em eps.ufsc.br
Quarta Março 10 11:55:45 BRT 2004
Olha Antonio,
Pelo que vi vc esta tentando usar o driver da Nvidia,
neste caso o prob não é no Xfreee, nem no acpi nem apic,
é porque o driver na nvidia nao esta carregando.
Vc ja testou com o driver "nv¨ do proprio Xfree?
Pois sao dois problemas diferentes.
Se o "nv" funcionar legal, e o problema for com o driver "nvidia"
as seguintes situações causam problemas
1--> o driver nvidia instalado não for o para o kernel em uso "uname
-r" solução item 4:
2--> ter dois kernels instalados com nomes proximos tipo
kernel-2.6.4-mdkcustom e kernel-2.6.4-mdk olhe no /lib/modules
remover os kernels que nao estao em uso e reinstalar o driver da
nvidia (item 4)
remover os /lib/modules/pagar
3--> erro no modprobe.conf e modules.conf, solução: em ambos deve constar:
alias /dev/nvidia* nvidia
ou
alias /dev/nvidia nvidia
alias /dev/nvidiactl nvidia
4--> instalando o driver da nvidia
desinstale o rpm da NVDIA caso ouver
baixar e instalar o driver do site da nvidia
-- depois de baixar vc da boot no modo texto e como root
instale o driver "sh NVIDIA ...."
se nao instalar verifique item 2
se instalar, chame "startx" para testar, se não carregar
verifique item 2 e 3
alem do site apos instalar vc pode ler o README com "less
/usr/share/doc/NVIDIA_GLX-1.0/README"
*** caso o "nv" esteja funcionando, depois de baixar o driver do site da
nvidia, desabilite o boot no modo grafico
*** com Painel de Controle/Hardware/Servidor Grafico/Opcoes
*** reiniciar, logar como root e instalar o driver
inte
Job
Antonio Carlos Ribeiro Nogueira wrote:
> Adriano Winter Bess wrote:
>
>> On Wed, Mar 10, 2004 at 09:08:15AM -0300, Antonio Carlos Ribeiro
>> Nogueira wrote:
>>
>>
>>> Pessoal, estou tendo problemas com a inicialização do XFree86 no
>>> Mandrake Linux 10.0 (versão recém lançada). Ele simplesmente não
>>> entra.
>>
>>
>> Poderias enviar teu XF86Config para a lista? Seria bom também enviar o
>> log do XFree86.
>>
>>
>>
>>> acpi=off splash=quiet" (não tenho muita certeza sobre o splash).
>>>
>>
>>
>> Tempos atrás tive problemas com o XFree86 justamente por estar com o
>> suporte a acpi desativado (tive que usar acpi=force).
>>
>> Abraços,
>> Adriano Winter Bess
>>
> Adriano, quando você diz enviar o meu XF86Config para a lisa é
> colocá-lo aberto em ascii? Aí vai...
>
> # File generated by XFdrake.
>
> # **********************************************************************
> # Refer to the XF86Config man page for details about the format of
> # this file.
> # **********************************************************************
>
> Section "Files"
> # Multiple FontPath entries are allowed (they are concatenated
> together)
> # By default, Mandrake 6.0 and later now use a font server
> independent of
> # the X server to render fonts.
> FontPath "unix/:-1"
> EndSection
>
> Section "ServerFlags"
> #DontZap # disable <Crtl><Alt><BS> (server abort)
> AllowMouseOpenFail # allows the server to start up even if the
> mouse doesn't work
> #DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching)
> EndSection
>
> Section "Module"
> Load "dbe" # Double-Buffering Extension
> Load "v4l" # Video for Linux
> Load "extmod"
> Load "type1"
> Load "freetype"
> Load "/usr/X11R6/lib/modules/extensions/libglx.so"
> EndSection
>
> Section "InputDevice"
> Identifier "Keyboard1"
> Driver "Keyboard"
> Option "XkbModel" "abnt2"
> Option "XkbLayout" "br"
> Option "XkbOptions" ""
> EndSection
>
> Section "InputDevice"
> Identifier "Mouse1"
> Driver "mouse"
> Option "Protocol" "IMPS/2"
> Option "Device" "/dev/mouse"
> Option "ZAxisMapping" "4 5"
> EndSection
>
> Section "Monitor"
> Identifier "monitor1"
> VendorName "Plug'n Play"
> HorizSync 30-71
> VertRefresh 50-160
>
> # Sony Vaio C1(X,XS,VE,VN)?
> # 1024x480 @ 85.6 Hz, 48 kHz hsync
> ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494
> 563 -hsync -vsync
>
> # TV fullscreen mode or DVD fullscreen output.
> # 768x576 @ 79 Hz, 50 kHz hsync
> ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630
>
> # 768x576 @ 100 Hz, 61.6 kHz hsync
> ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
> EndSection
>
> Section "Device"
> Identifier "device1"
> VendorName "nVidia Corporation"
> BoardName "NVIDIA GeForce4 (generic)"
> Driver "nvidia"
> Option "DPMS"
> Option "IgnoreEDID" "1"
> EndSection
>
> Section "Screen"
> Identifier "screen1"
> Device "device1"
> Monitor "monitor1"
> DefaultColorDepth 24
>
> Subsection "Display"
> Depth 8
> Virtual 1024 768
> EndSubsection
> Subsection "Display"
> Depth 15
> Virtual 1024 768
> EndSubsection
>
> Subsection "Display"
> Depth 16
> Virtual 1024 768
> EndSubsection
> Subsection "Display"
> Depth 24
> Virtual 1024 768
> EndSubsection
> EndSection
>
> Section "ServerLayout"
> Identifier "layout1"
> InputDevice "Keyboard1" "CoreKeyboard"
> InputDevice "Mouse1" "CorePointer"
> Screen "screen1"
> EndSection
>
> Onde fica o log do XFree86? Fica no /usr/var/log? Mas não é muito
> grande? Apropósito, o que faz este "acpi"? No meu estava inicialmente
> "acpi=ht". Eu é que mudei para "acpi=off" porque em muitos docs e
> manuais do Mandrake eles recomendavam fazer "acpi=off"
> Com relação ao colocar hdc=ide-scsi no append do lilo, estou recebendo
> uma mensagem no dmesg que "ide-scsi is deprecated in CD burnnings" é
> para usar hdc=ide-cd e colocar /dev/hdX no fstab... Quer dizer que
> não é para se usar mais o hdc=ide-scsi para emular scsi?
>
> Anexo também o resultado do dmesg... Inclusive eu coloquei em negrito
> uma mensagem que creio eu seja sobre a tentativa de inicializar o
> XFree86.
>
> Linux version 2.6.3-4mdk (nplanel em n3.mandrakesoft.com) (gcc version
> 3.3.2 (Mandrake Linux 10.0 3.3.2-6mdk)) #1 Tue Mar 2 07:26:13 CET 2004
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
> BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
> BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved)
> BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
> 511MB LOWMEM available.
> On node 0 totalpages: 131056
> DMA zone: 4096 pages, LIFO batch:1
> Normal zone: 126960 pages, LIFO batch:16
> HighMem zone: 0 pages, LIFO batch:1
> DMI 2.3 present.
> Built 1 zonelists
> Kernel command line: auto BOOT_IMAGE=linux ro root=309 devfs=mount
> hdd=ide-scsi acpi=off resume=/dev/hda8 splash=silent
> ide_setup: hdd=ide-scsi
> bootsplash: silent mode.
> Local APIC disabled by BIOS -- reenabling.
> Found and enabled local APIC!
> Initializing CPU#0
> PID hash table entries: 2048 (order 11: 16384 bytes)
> Detected 1460.714 MHz processor.
> Using tsc for high-res timesource
> Console: colour dummy device 80x25
> Memory: 514852k/524224k available (1815k kernel code, 8608k reserved,
> 846k data, 272k init, 0k highmem)
> Checking if this processor honours the WP bit even in supervisor
> mode... Ok.
> Calibrating delay loop... 2891.77 BogoMIPS
> Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
> Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
> Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
> checking if image is initramfs...it isn't (no cpio magic); looks like
> an initrd
> Freeing initrd memory: 132k freed
> CPU: After generic identify, caps: 0183fbff c1c3fbff 00000000
> 00000000
> CPU: After vendor identify, caps: 0183fbff c1c3fbff 00000000 00000000
> Enabling disabled K7/SSE Support.
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 256K (64 bytes/line)
> CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020
> Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#0.
> CPU: AMD Athlon(tm) XP 1700+ stepping 00
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Checking 'hlt' instruction... OK.
> POSIX conformance testing by UNIFIX
> enabled ExtINT on CPU#0
> ESR value before enabling vector: 00000000
> ESR value after enabling vector: 00000000
> Using local APIC timer interrupts.
> calibrating APIC timer ...
> ..... CPU clock speed is 1460.0196 MHz.
> ..... host bus clock speed is 265.0490 MHz.
> NET: Registered protocol family 16
> EISA bus registered
> spurious 8259A interrupt: IRQ7.
> PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1
> PCI: Using configuration type 1
> mtrr: v2.0 (20020519)
> ACPI: Subsystem revision 20040211
> ACPI: Interpreter disabled.
> Linux Plug and Play Support v0.97 (c) Adam Belay
> PnPBIOS: Disabled
> PCI: Probing PCI hardware
> PCI: Probing PCI hardware (bus 00)
> PCI: Using IRQ router SIS [1039/0008] at 0000:00:02.0
> vesafb: framebuffer at 0xc8000000, mapped to 0xe0800000, size 16384k
> vesafb: mode is 800x600x16, linelength=1600, pages=2
> vesafb: protected mode interface info at c000:ed00
> vesafb: scrolling: redraw
> vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
> fb0: VESA VGA frame buffer device
> apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
> ikconfig 0.7 with /proc/config*
> VFS: Disk quotas dquot_6.5.1
> devfs: 2004-01-31 Richard Gooch (rgooch em atnf.csiro.au)
> devfs: boot_options: 0x1
> Initializing Cryptographic API
> isapnp: Scanning for PnP cards...
> isapnp: No Plug & Play device found
> bootsplash 3.1.3-2003/11/14: looking for picture.... silentjpeg size
> 14856 bytes, found (800x600, 14808 bytes, v3).
> Console: switching to colour frame buffer device 92x32
> pty: 1024 Unix98 ptys configured
> Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
> ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> PCI: Found IRQ 11 for device 0000:00:02.6
> RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with
> idebus=xx
> SIS5513: IDE controller at PCI slot 0000:00:02.5
> SIS5513: chipset revision 208
> SIS5513: not 100% native mode: will probe irqs later
> SIS5513: SiS735 ATA 100 (2nd gen) controller
> ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
> ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
> hda: Maxtor 6E030L0, ATA DISK drive
> hdb: QUANTUM FIREBALL EX5.1A, ATA DISK drive
> Using anticipatory io scheduler
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> hdc: HL-DT-ST RW/DVD GCC-4480B, ATAPI CD/DVD-ROM drive
> hdd: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive
> ide1 at 0x170-0x177,0x376 on irq 15
> hda: max request size: 128KiB
> hda: 60058656 sectors (30750 MB) w/2048KiB Cache, CHS=59582/16/63,
> UDMA(100)
> /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 p9 p10 >
> hdb: max request size: 128KiB
> hdb: 10018890 sectors (5129 MB) w/418KiB Cache, CHS=10602/15/63, UDMA(33)
> /dev/ide/host0/bus0/target1/lun0: p1 p2 < p5 p6 >
> Console: switching to colour frame buffer device 92x32
> mice: PS/2 mouse device common for all mice
> serio: i8042 AUX port at 0x60,0x64 irq 12
> input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
> serio: i8042 KBD port at 0x60,0x64 irq 1
> input: AT Translated Set 2 keyboard on isa0060/serio0
> md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
> EISA: Probing bus 0 at eisa0
> NET: Registered protocol family 2
> IP: routing cache hash table of 4096 buckets, 32Kbytes
> TCP: Hash tables configured (established 32768 bind 65536)
> NET: Registered protocol family 1
> BIOS EDD facility v0.12 2004-Jan-26, 3 devices found
> Please report your BIOS at http://linux.dell.com/edd/results.html
> Resume Machine: resuming from /dev/hda8
> Resuming from device hda8
> Resume Machine: This is normal swap space
> PM: Reading pmdisk image.
> PM: Resume from disk failed.
> md: Autodetecting RAID arrays.
> md: autorun ...
> md: ... autorun DONE.
> RAMDISK: Compressed image found at block 0
> VFS: Mounted root (ext2 filesystem).
> Mounted devfs on /dev
> kjournald starting. Commit interval 5 seconds
> EXT3-fs: mounted filesystem with ordered data mode.
> Mounted devfs on /dev
> Freeing unused kernel memory: 272k freed
> Real Time Clock Driver v1.12
> drivers/usb/core/usb.c: registered new driver usbfs
> drivers/usb/core/usb.c: registered new driver hub
> ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
> ohci_hcd: block sizes: ed 64 td 64
> PCI: Found IRQ 11 for device 0000:00:02.2
> ohci_hcd 0000:00:02.2: OHCI Host Controller
> ohci_hcd 0000:00:02.2: irq 11, pci mem e192c000
> ohci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 3 ports detected
> PCI: Found IRQ 11 for device 0000:00:02.3
> ohci_hcd 0000:00:02.3: OHCI Host Controller
> ohci_hcd 0000:00:02.3: irq 11, pci mem e192e000
> ohci_hcd 0000:00:02.3: new USB bus registered, assigned bus number 2
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 3 ports detected
> EXT3 FS on hda9, internal journal
> Adding 522072k swap on /dev/hda8. Priority:-1 extents:1
> nvidia: module license 'NVIDIA' taints kernel.
> 0: nvidia: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-5336
> Wed Jan 14 18:29:26 PST 2004
> SCSI subsystem initialized
> imm: Version 2.05 (for Linux 2.4.0)
> parport0: PC-style at 0x378 [PCSPP,TRISTATE]
> parport0: cpp_mux: aa55f00f52ad51(37)
> parport0: cpp_daisy: aa5500ff(30)
> parport0: assign_addrs: aa5500ff(30)
> parport0: cpp_mux: aa55f00f52ad51(37)
> parport0: cpp_daisy: aa5500ff(30)
> parport0: assign_addrs: aa5500ff(30)
> ppa: Version 2.07 (for Linux 2.4.x)
> Linux video capture interface: v1.00
> bttv: driver version 0.9.12 loaded
> bttv: using 8 buffers with 2080k (520 pages) each for capture
> bttv: Bt8xx card found (0).
> PCI: Found IRQ 11 for device 0000:00:0b.0
> PCI: Sharing IRQ 11 with 0000:00:0b.1
> bttv0: Bt878 (rev 2) at 0000:00:0b.0, irq: 11, latency: 64, mmio:
> 0xcddfe000
> bttv0: using: Prolink Pixelview PV-BT878P+ (Rev.4C,8E) [card=70,insmod
> option]
> bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
> bttv0: using tuner=25
> bttv0: i2c: checking for MSP34xx @ 0x80... not found
> bttv0: i2c: checking for TDA9875 @ 0xb0... not found
> bttv0: i2c: checking for TDA7432 @ 0x8a... not found
> tvaudio: TV audio decoder + audio/video mux driver
> tvaudio: known chips:
> tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54
> (PV951),ta8874z
> tuner: chip found @ 0xc2
> tuner: type set to 25 (LG PAL_I+FM (TAPC-I001D))
> tuner: type forced to 17 (Philips NTSC_M (MK2)) [insmod]
> tuner: type already set (17)
> bttv0: registered device video0
> bttv0: registered device vbi0
> bttv0: registered device radio0
> bttv0: PLL: 28636363 => 35468950 .. ok
> bttv0: add subdevice "remote0"
> Linux agpgart interface v0.100 (c) Dave Jones
> agpgart: Detected SiS 735 chipset
> agpgart: Maximum main memory to use for agp memory: 439M
> agpgart: AGP aperture is 64M @ 0xd0000000
> hdc: ATAPI 40X DVD-ROM CD-R/RW CD-MRW drive, 2048kB Cache, UDMA(33)
> Uniform CD-ROM driver Revision: 3.20
> scsi0 : SCSI host adapter emulation for IDE ATAPI devices
> Vendor: IOMEGA Model: ZIP 100 Rev: 03.H
> Type: Direct-Access ANSI SCSI revision: 00
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on hda7, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on hda10, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> Supermount version 2.0.4 for kernel 2.6
> NTFS driver 2.1.6 [Flags: R/O MODULE].
> NTFS-fs warning (device hda1): parse_options(): Option iocharset is
> deprecated. Please use option nls=<charsetname> in the future.
> NTFS volume version 3.0.
> SCSI device sda: 196608 512-byte hdwr sectors (101 MB)
> sda: Write Protect is off
> sda: Mode Sense: 45 00 00 08
> SCSI device sda: drive cache: write back
> /dev/scsi/host0/bus0/target0/lun0: p4
> Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
> sis900.c: v1.08.07 11/02/2003
> PCI: Found IRQ 11 for device 0000:00:03.0
> eth0: Realtek RTL8201 PHY transceiver found at address 1.
> eth0: Using transceiver found at address 1 as default
> eth0: SiS 900 PCI Fast Ethernet at 0xd400, IRQ 11, 00:07:95:2f:88:01.
> inserting floppy driver for 2.6.3-4mdk
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a post-1991 82077
> bootsplash: status on console 0 changed to on
> drivers/usb/core/usb.c: registered new driver hiddev
> drivers/usb/core/usb.c: registered new driver hid
> drivers/usb/input/hid-core.c: v2.0:USB HID core driver
> NET: Registered protocol family 17
> eth0: Media Link On 10mbps half-duplex
> cs4281: version v1.13.32 time 07:21:24 Mar 2 2004
> PCI: Found IRQ 5 for device 0000:00:09.0
> NET: Registered protocol family 10
> Disabled Privacy Extensions on device c035fa20(lo)
> IPv6 over IPv4 tunneling driver
> *0: NVRM: client supports wrong rm api version!!
> 0: NVRM: aborting to avoid catastrophe!
> lp0: using parport0 (polling).
> lp0: console ready
> **0: NVRM: client supports wrong rm api version!!
> 0: NVRM: aborting to avoid catastrophe!
> 0: NVRM: client supports wrong rm api version!!
> 0: NVRM: aborting to avoid catastrophe!
> *CSLIP: code copyright 1989 Regents of the University of California
> PPP generic driver version 2.4.2
> 0: NVRM: client supports wrong rm api version!!
> 0: NVRM: aborting to avoid catastrophe!
> eth0: no IPv6 routers present
> bootsplash 3.1.3-2003/11/14: looking for picture.... found (800x600,
> 11943 bytes, v3).
> bootsplash: status on console 0 changed to on
> bootsplash 3.1.3-2003/11/14: looking for picture.... found (800x600,
> 11943 bytes, v3).
> bootsplash: status on console 1 changed to on
> bootsplash 3.1.3-2003/11/14: looking for picture.... found (800x600,
> 11943 bytes, v3).
> bootsplash: status on console 2 changed to on
> bootsplash 3.1.3-2003/11/14: looking for picture.... found (800x600,
> 11943 bytes, v3).
> bootsplash: status on console 3 changed to on
> bootsplash 3.1.3-2003/11/14: looking for picture.... found (800x600,
> 11943 bytes, v3).
> bootsplash: status on console 4 changed to on
> bootsplash 3.1.3-2003/11/14: looking for picture.... found (800x600,
> 11943 bytes, v3).
> bootsplash: status on console 5 changed to on
>
> Nogueira
> nogueira em emc.ufsc.br
>
>
> _______________________________________________
> GUFSC mailing list
> GUFSC em das.ufsc.br
> https://listas.das.ufsc.br/mailman/listinfo/gufsc
>
>
Mais detalhes sobre a lista de discussão GUFSC