[GUFSC] software livre roubado!
José Luiz Bittencourt
jlbitt em yahoo.com
Quinta Agosto 14 14:34:11 GMT+3 2003
---------------------------------------------------------------------------
> Copyright:
> O2EM is copyright 1997,1998 by Daniel Boris.
>
> Odyssey 2 and Videopac are trademarks of Philips
> Electronics.
>
> O2EM is free as long as it is not used in a
> commercial matter and not
> altered in any way. The contents of this archive
> should not be
> added to or changed in any way. ROM images should
> never be distributed
> with this emulator.
>
> I maintain the right to forbid the use of the
> emulator at
> any time. I am not responsible for any damage caused
> by the use
> of this program. This program is distributed
> "as-is". I make no
> guarantees as to it's accuracy, performance, or
> compatibility with
> the users hardware.
>
> The emulator is not to be distributed for profit and
> may not be
> included on CD's without my express permission.
>
>
---------------------------------------------------------------------------
>
>
> Introduction
>
> This emulator was originally built up completely
> from scratch with
> almost no technical information to work from. The
> only materials I had
> to work with when writing this emulator were the
> Intel 8048 microcontroller
> data book, an O^2 console, and a couple of
> cartridges. Everything else was
> figured out by tracing circuits, running code on the
> real hardware, and
> generally do a lot of high tech detective work.
> Recently I acquired some
> official O2 programming info that has helped me
> confirm the things that I
> worked out and to fill in a few things that I was
> missing.
>
> The current version of O2EM can be found at:
>
> http://o2em.sourceforge.net
> http://atarihq.com/danb
>
>
---------------------------------------------------------------------------
>
> Quick Setup:
>
> To get O2EM up and running quickly follow these
> steps:
>
> 1. Create a directory called O2EM on your hard
> drive.
> 2. Unzip the O2EM archive into the O2EM directory.
> 3. Download the bios ROM O2ROM.BIN and put it into
> your O2EM directory.
> 4. Download one or more game ROMs, for example
> KCMUNCH.BIN for KC Munchkin and
> put the ROM in your O2EM directory.
> 5. From the O2EM directory type: o2em KCMUNCH.BIN to
> start the game.
>
>
---------------------------------------------------------------------------
> Setup:
>
> Before you can run O2EM you need a copy of the
> Odyssey2 or Videopac bios
> ROM. For copyright reasons I am not including this
> ROM image in this archive.
> This ROM image is stored inside the 8048 processor
> and can be read out with
> the appropriate equipment. The image should be 1024
> bytes long , named
> o2rom.bin and should be in the same directory as the
> emulator.
>
> You will also need cartridge images, but again
> for copyright reasons
> I cannot provide these. PLEASE DO NOT E-mail me
> asking for ROM images! All
> messages asking for ROM images will be promptly
> deleted.
>
> If you wish to use Voice emulation for games
> like KC's Krazy Chase, create
> a directory called VOICE in the directory where you
> have O2EM. Download the
> voice samples and unzip them into the VOICE
> directory. There are two sets
> of voice samples, mainsamp.zip which is the main
> voice samples and sidsamp.zip
> which are the samples used by the game Sid the
> Spellbinder. You only need the
> Sid samples if you want voice in that game.
>
>
---------------------------------------------------------------------------
>
>
> Usage:
>
>
> o2em <file> [options]
>
> <file> = file to load with extension
>
>
> options:
>
> -wsize=n Window size used by the emulator
> (1=original, 2=double size, etc.)
>
> -fullscreen Use full screen mode
>
> -scanlines Enable scanlines use by the video
> emulation. Scanlines are a
> feature that makes your display look
> like a TV screen.
>
> -nosound Turn off sound emulation
>
> -novoice Turn off voice emulation
>
> -svolume=n Set sound volume (0-100)
>
> -vvolume=n Set voice volume (0-100)
>
> -debug Start the emulator in debug mode
>
=== message truncated ===>
_______________________________________________
> GUFSC mailing list
> GUFSC em das.ufsc.br
> http://www.das.ufsc.br/mailman/listinfo/gufsc
>
=====
"A perfeição é alcançada não quando não há mais o que se acrescentar, mas sim quando não há mais o que se tirar" (Antoine de Saint-Exupery)
José Luiz Bittencourt
Engenharia - Desenvolvimento de Sistemas
Pollux - Sistemas Industriais de Visão
Hahntel S/A Fone: +55 48 234-4027/ Fax +55 48 234-3896
_______________________________________________________________________
Conheça o novo Cadê? - Mais rápido, mais fácil e mais preciso.
Toda a web, 42 milhões de páginas brasileiras e nova busca por imagens!
http://www.cade.com.br
Mais detalhes sobre a lista de discussão GUFSC